อู่ฉัตรเพชร ขั้นตอนการทำสีรถยนต์

1. Clean the basis of the wounded area with a cleanser to collect grease and residue.
2. Open the wound with a round head scrubber.
3. Clean the workpiece with a solution.
4. Apply paint onto the workpiece according to the damaged condition for 3-4 times. For tint to adhere to the workpiece.
5. Bake tinted with infrared machine, heat to 70-80 degrees and let the tint to cool down.
6. Scrub open the tinting face and smooth out the tinted skin. And clean the scrub areas.
7. Apply 2-3 coats of primer to prevent the floor paint from frustrating. Each trip has to be abandoned during 2-3 minutes.
8. Bake the primer in the baking room for 12 minutes.
9. Scrub the face, open the primer. And check the smoothness.
10. Use a blow gun to clean. And wipe clean with liquid.
11. Use light to Day Light brightness 1500 Luk to check the smoothness of the workpiece.
12. The first real paint By covering the workpiece before 50-70%
13. Second time actually spraying By covering the work piece 100%
14. Check to see if the color matches the desired color.
15. Drying at 60 degrees for 30 minutes or infrared 10 minutes.
16. Spray paint to cover the work piece 2 times.
17. Wait for the workpiece to cool before taking it out of the pipe room. Polished with polish.
18. Inspect work before delivery.

1. knock In the damaged part to fit In which this repair requires a technician. With a great deal of knowledge and expertise in order to bring the workpiece back to its perfect condition.

2. Prepare the ground Sanding and painting the surface. Careful examination of the work surface area In order to see the damaged surface. That work surface before the technician will spray paint the floor And the final car spray paint, the surface should be smooth and clean. This will make the sprayed paint adhere to the work surface firmly and durable. If the surface is rough or scratched Should always fill and decorate that area first, every time.

3. Insertion Put the paint onto the workpiece according to the damaged condition for 3-4 times in order to stick the paint on the work piece. Wait for the pink to cool for 5 minutes, scrub, open the pink color and adjust the pinkish skin to be smooth. And clean the polished surface.

4. Mix color Add thinner or reducer slowly and mix. And keep adding thinner Until getting the desired amount. When mixing the paint, if the mixture is fast or the thinner is too fast, the spray paint will become granular.

5. Spray paint First time actually spraying by covering 50-70% of the work first and spraying the second time of actual painting. By covering the work piece 100% Leave the time before the final paint is actually sprayed. Then dry at 60 C for 30 minutes or infrared baking for 10 minutes. Wait for the workpiece to cool before removing it from the spray chamber.

7. Scrub Using a solution or wax Drops on the scrubbing area of the machine. Then, it is gently scrubbed on the surface of the car.

Color bar

Color matching machine